100% Original Beam Bracket - Light steel connector for villa – Tuoou

1.Strong pull-resistant fasteners / anchoring parts / wind resistance part / Aseismic connector / Windproof and shockproof light steel structural connector
Size : 3*66*251
The anti-pullout part is installed in the thin-wall light steel wall keel, generally used with the expansion bolt interval, for the connection between the first floor and the foundation floor , the side is fixed on the vertical keel with the hexagonal round head drilling screw, the bottom is fixed with the anchor bolt, and the gap of 30-50mm is left for earthquake resistance.

2.Lightweight pull-out parts, light steel connectors, light steel pull-out parts
Size:30*60*50*170
Corner code connectors, light steel structure connectors, anti-pull connectors
Aperture can be customized 12 14 16 18

3.Windproof fasteners, rotary type fasteners, light steel structure fasteners
Size: 2.0*40*164
Rotating connectors, rotating wind resistant pull parts, used for wind resistance reinforcement of wooden houses, pavilions and other buildings, used in all kinds of specifications of keel and beam connectors, rotary connectors, light steel structure connectors

4.Hurricane clamp, rhombus connector, keel and beam connector
Size: 2*90*189*212
Integral molding, pressing steel treatment, pre-punching, with higher strength.

5.Light steel resistance type A, light steel structure wind resistance body
size：2.0*35*114
Products are divided into about two pieces, can be used according to the needs.
The extra nailing space above the direction of connecting the wall can be used to connect other wall materials.

6.Pull-out fasteners, light steel structural connectors
Size:2*38*110
Light steel pull-out fastener type B, small pull-out fastener.
It is suitable for the connection of all kinds of keel or light steel structure wall bone and bottom beam and ground beam.
Products are divided into left and right two pieces, according to the need can be used together.

7. T type connecting piece beam and column connecting piece
Size: 2*90*270*210
T-type connectors, wooden beam and column connectors, pre-punched, uniform layout。
U-T-type connectors are used on the wall with T connection, fixed with thin flat head or round head drilling screw, not less than 5 pieces at each end.

8.Planar right Angle connector
Size:2*150*150
Corner connectors, flat connectors, light steel structure connectors, corner connectors, used for light steel structure wall corner connection or wood to wood corner connection, size can be customized.

9.Beam bracket, U type pendant
Size：2*89*170
Beam bracket connector, can be used for the thickness of 89mm beam connection, available beam size: 89*184* (4*8), 89*235 (4*10), wood structure villa metal fittings, light steel structure connector, light steel structure connector, beam bracket connector.Beam bracket connectors are equivalent to connecting two corner codes into a single unit for higher strength.

10.Light steel drawstring tensioner
Size:1*40*90

11 Panel clips, plywood clips
Size:1*12.7*38
H fasteners, PANEL CLIPS, H, OSB board clip, roof, used for light steel housing and wooden OSB board, this product has a variety of openings are: 9.5 MM, 11.9 MM, 12.7 MM, 15.1 MM and 15.8 MM.Please select the corresponding model according to the thickness of the board.

12 Corner Code, Angle Iron, L Type Connectors, L Type Iron Parts
Size:2*60*32*32 and 2*50*50*50
Corner code connector type A, small corner code, small corner code connector, light steel structure connector
The thickness of the corner code connector is 2MM, and three nail holes are pre-punched on both sides respectively. Small ribs are added at the corner to enhance the bending resistance.
Corner code connectors are mostly used for the connection of the inner corner of the wall, which is easy to install.Fix with thin flat head or round head drill – tail screw, screw full.
It is recommended to use 3 or more for each wall shade corner.When used in other positions, it is better to make the screw in the shear state.

13 Nail board connectors, plate connectors, roof truss connectors
Size:2*80*210
Light steel structure connector, length can be lengthened or shortened according to demand.
Pre-punching, dislocation layout, reasonable distribution.The width of 80MM is slightly less than the sum of the waist height of the two keels, which can be used vertically to connect the two walls.
The flat connector is used for connecting the top and side of the corner wall with a thin flat head or round head screw. No less than 6 screws should be used at each end, evenly arranged.

14.Light steel belt
Size:1*35C
Light steel pull belt, this product is a whole bundle of coil material, can be cut according to the actual need of the length
This model is 1MM windproof seismic pull belt, light steel structural connector, and the thickness of 2MM specification.Pre-punched and uniformly dislocated to provide tensile strength.
Light steel pull belt is used to connect the upper and lower two layers of walls and shelves into one, fixed with thin flat head or round head screws, the upper, middle and lower three sections are not less than 5 each.

15.Floor drawstring
Size:2*80*1000